Supported imaging acquisition devices
Legend
Windows |
Mac |
Supported Intraoral X-ray Devices
-
A2Z Imaging DUO
-
Acteon Sopro SOPIX Gen. 1 (for Windows OS, supported directly or via a TWAIN driver; for Mac OS, supported directly) ( see note # 2 below)
-
Acteon Sopro SOPIX Gen. 2 ( see note # 2 below)
-
Apteryx Tuxedo (supported using "e2v" as the acquisition device) ( see note # 2 below)
Note: Tuxedo sensors that were manufactured prior to 2019 are Hamamatsu devices (LED Dental Tuxedo sensors), which are supported using Hamamatsu as the acquisition device. Contact LED Dental to verify if your Tuxedo sensor is a Hamamatsu device or an e2v device.
-
Brassler GEM
-
CARINA
-
DentalSensors.com Apex
-
Dentimax Dream (supported using "e2v" as the acquisition device) ( see note # 2 below)
-
Dentsply Sirona XIOS AE (supported directly using "Sirona / Schick USB 3 / AE" as the acquisition device; or supported via the SiTWAIN driver)
-
Dentsply Sirona XIOS XG Select (supported directly using "Sirona / Schick USB 3 / AE" as the acquisition device; or supported via the SiTWAIN driver)
-
Dentsply Sirona XIOS XG Supreme (supported directly using "Sirona / Schick USB 3 / AE" as the acquisition device with a USB 2.0/3.0 interface; supported directly using "Schick 33 / Xios XG" as the acquisition device with a USB 2.0 interface; or supported via the SiTWAIN driver)
-
Dexis Platinum ( see note # 2 below)
-
Dexis Titanium ( see note # 2 below)
-
EVA Select (supported using "e2v" as the acquisition device) ( see note # 2 below)
-
Gendex/KaVo IO (supported using GxPicture as the acquisition device)
-
FTG DC-Air / CEFLA
-
Gendex GXS-700
-
Gendex Visualix eHD (only compatible with Windows 7)
Important: This device is not officially supported because it is only compatible with an unsupported operating system. However, this device may function with Dentrix Ascend Imaging on a computer running Windows 7.
-
Gendex Visualix GX-S (only compatible with Windows XP)
Important: This device is not officially supported because it is only compatible with an unsupported operating system. However, this device may function with Dentrix Ascend Imaging on a computer running Windows XP.
-
GxPicture devices
-
Hamamatsu
Note: Tuxedo sensors that were manufactured prior to 2019 are Hamamatsu devices.
-
Handy HDR-360/460 and HDR-500/600
-
ImageWorks EVA Select (supported directly using "e2v" as the acquisition device; or supported via a TWAIN driver)
-
InstaRay (supported using Hamamatsu as the acquisition device) ( see note # 2 below)
-
iRay Pluto
-
Jazz (supported via a TWAIN driver)
-
Jazz Solo
-
KaVo Dig eXam
-
KaVo IXS
-
Kodak/Carestream 5000 series and 6000 series (supported directly or via a TWAIN driver)
-
LED Dental Tuxedo (supported using "Hamamatsu" as the acquisition device)
Note: Tuxedo sensors that were manufactured in or after 2019 are e2v devices (Apteryx Tuxedo sensors), which are supported using e2v as the acquisition device. Contact LED Dental to verify if your Tuxedo sensor is a Hamamatsu device or an e2v device.
-
Midmark Progeny ClearVision (supported directly or via a TWAIN driver)
-
Owandy ONE and OPTEO
-
Planmeca ProSensor (supported via DIDAPI)
-
Planmeca ProSensor HD (supported via DIDAPI; for Mac OS, DIDAPI 5.4.0 or newer is required) ( see note # 2 below)
-
Polaroid KEREN HD-S (supported via a TWAIN driver)
-
QuickRay (supported using "e2v" as the acquisition device) ( see note # 2 below)
-
QuickRay HD (supported using "Hamamatsu" as the acquisition device) ( see note # 2 below)
-
Remedi (supported using "Hamamatsu" as the acquisition device)
-
Schick 33 (from Dentsply Sirona; supported directly using "Sirona / Schick USB 3 / AE" as the acquisition device with a USB 2.0/3.0 interface; supported directly using "Schick 33 / Xios XG" as the acquisition device with a USB 2.0 interface; supported via the SiTWAIN driver with a USB 2.0/3.0 interface; or supported via the "CDR Inra-oral X-ray Acquisition" TWAIN driver with a USB 2.0 interface)
-
Schick AE (from Dentsply Sirona; supported directly using "Sirona / Schick USB 3 / AE" as the acquisition device; or supported via the SiTWAIN driver)
-
Schick CDR 2000 (from Dentsply Sirona; supported directly or via a TWAIN driver; only compatible with Windows 7 32-bit)
Important: This device is not officially supported because it is only compatible with an unsupported operating system. However, this device may function with Dentrix Ascend Imaging on a computer running Windows 7 32-bit.
-
Schick Elite (from Dentsply Sirona; supported directly using "Sirona / Schick USB 3 / AE" as the acquisition device with a USB 2.0/3.0 interface; supported directly using "Schick CDR / Elite" as the acquisition device with a USB 2.0 interface; or supported via the SiTWAIN driver)
-
Schick HS (from Dentsply Sirona; supported directly or via a TWAIN driver; only compatible with Windows 7)
Important: This device is not officially supported because it is only compatible with an unsupported operating system. However, this device may function with Dentrix Ascend Imaging on a computer running Windows 7.
-
SOTA Clio/Clio Prime (supported using "e2v" as the acquisition device) ( see note # 2 below)
-
Suni (most models supported via a TWAIN driver; contact the support department to verify)
-
Teledyne e2v ( see note # 2 below)
Note: e2v sensors are rebranded and sold by many companies under their specific brand names. The following devices are supported using e2v as the acquisition device:
-
Dentimax Dream sensor
-
EVA Select sensor
-
SOTA Clio/Clio Prime sensor
-
Apteryx Tuxedo sensor (the older model is supported using Hamamatsu as the acquisition device)
-
QuickRay/InstaRay
-
XDR X-ray sensor
-
-
Vatech HD Sensor (supported directly, via a TWAIN driver, or via the Vatech EzDent-i Software Bridge)
-
Vatech Wave Sensor (supported via a TWAIN driver or Vatech EzDent-i Software Bridge)
-
Video Dental Concepts QuickRay HD
-
XDR X-ray sensor ( supported using "e2v" as the acquisition device; see note # 2 below)
-
Carestream Imaging Software Bridge
-
Dexis Software Bridge
-
DTX Studio Clinic Software Bridge
-
J. Morita i-Dixel Software Bridge
-
Romexis Software Bridge ( see note # 2 below)
-
Sidexis Software Bridge
-
Vatech EzDent-i Software Bridge
-
File Import (.bmp, .png, .jpg, .tif)
Supported Intraoral/Extraoral X-ray Phosphor Plate Devices
-
Acteon Sopro PSPIX ( see note # 2 below)
-
Air Techniques ScanX Classic
-
Air Techniques ScanX Duo
-
Air Techniques ScanX IO
-
Air Techniques ScanX Swift
-
Carestream CS7600
-
Durr VistaScan (supported directly, via a TWAIN driver, or via VisionX Connect for Windows 11)
-
Durr VistaScan Combi+ (supported directly, via a TWAIN driver, or via VisionX Connect for Windows 11)
-
Durr VistaScan Mini (supported directly, via a TWAIN driver, or via VisionX Connect for Windows 11)
-
Durr VistaScan Perio (supported directly, via a TWAIN driver, or via VisionX Connect for Windows 11)
-
Gendex Denoptix QST
-
Gendex GXPS-500
-
GxPicture devices
-
Instrumentarium Express
-
Instrumentarium Express Origo
-
KaVo Scan eXam
-
KaVo Scan eXam One
-
Soredex Digora Optime
Supported Extraoral X-ray Devices (Pan and Ceph)
-
Dentsply Sirona Orthophos SL Series (supported via a TWAIN driver)
-
Dentsply Sirona Orthophos XG 3, 5, Plus, 3D Ready, and 3D (supported via a TWAIN driver)
-
Gendex GXDP-300
-
Gendex GXDP-700 Series
-
Gendex Orthoralix 8500/9200 DDE
-
GxPicture devices
-
Instrumentarium OP30
-
Instrumentarium OP300 (supported via a TWAIN driver)
-
J. Morita Veraviewepocs 2D (supported via a TWAIN driver or the i-Dixel software bridge)
-
J. Morita Veraviewepocs 3D Series (supported via a TWAIN driver or the i-Dixel software bridge)
-
J. Morita Veraview IC5 HD (supported via a TWAIN driver or the i-Dixel software bridge)
-
J. Morita Veraview X800 (supported via a TWAIN driver or the i-Dixel software bridge)
-
KaVo OP3D (supported via an Instrumentarium TWAIN 7.6 driver)
-
KaVo ProXam 2D, 3D, 3DQ, and Ceph
-
Kodak 8000/8100 (supported via a TWAIN driver)
-
Kodak 9000/9300 (supported via a TWAIN driver)
-
Planmeca ProMax (supported via DIDAPI; for Mac OS, DIDAPI 5.4.0 or newer is required) ( see note # 2 below)
-
Planmeca ProOne (supported via DIDAPI; for Mac OS, DIDAPI 5.4.0 or newer is required) ( see note # 2 below)
-
Vatech PaX-i and PaX-i Plus (supported via a TWAIN driver or Vatech EzDent-i Software Bridge)
-
Carestream Imaging Software Bridge
-
Dexis Software Bridge
-
DTX Studio Clinic Software Bridge
-
J. Morita i-Dixel Software Bridge
-
Romexis Software Bridge ( see note # 2 below)
-
Sidexis Software Bridge
-
Vatech EzDent-i Software Bridge
-
File Import (.bmp, .png, .jpg, .tif)
Supported Intraoral/Extraoral Color Photo Devices
-
Acteon Sopro (all models) ( see note # 3 below)
-
Air Techniques CamX Polaris (supported via a TWAIN driver)
-
Air Techniques CamX Spectra (supported via a TWAIN driver)
-
Carestream CS1000, CS1200, and CS1500 (supported via a TWAIN driver)
-
Dexis CariVu ( see note # 2 below)
-
Dexis DEXcam 3
-
Dexis DEXcam 4
-
Dexis DEXcam 4 HD
-
Digital Doc (Mac version) ( see note # 2 below)
-
Digital Doc IRIS (non-HD)
-
Digital Doc IRIS HD
-
DiscoveryHD Lite (Wired) ( see note # 2 below)
-
DiscoveryHD Lite (Wireless)
-
DiscoveryHD Pro (Wired) ( see note # 2 below)
-
DiscoveryHD Pro (Wireless)
-
DrsCam (Wired) ( see note # 2 below)
-
DrsCam (Wireless)
-
EZ ShotHD (Wired) ( see note # 2 below)
-
EZ ShotHD (Wireless)
-
iPad (supported using one of the built-in cameras via the Safari browser on iOS)
-
MouthWatch (supported using "Generic Intraoral Camera" as the acquisition device; MouthWatch Capture must be installed and configured)
-
PerfectCam (supported using "Generic Intraoral Camera" as the acquisition device; PerfectCam Capture must be installed and configured)
-
Polaroid (Wired) ( see note # 2 below)
-
Polaroid (Wireless)
-
RealCloud HD1 (for Mac OS, supported using "Generic Intraoral Camera device" as the acquisition device) ( see note # 2 below)
-
SuniCam HD (Wired) ( see note # 2 below)
-
SuniCam HD (Wireless)
-
WhicamStory3 (Wired) ( see note # 2 below)
-
WhicamStory3 (Wireless)
-
Any USB intraoral camera with buttons that have a joystick/game-port interface
-
Any USB intraoral camera without buttons that has a foot pedal (or a similar triggering device) with a joystick interface
-
Carestream Imaging Software Bridge
-
Dexis Software Bridge
-
DTX Studio Clinic Software Bridge
-
J. Morita i-Dixel Software Bridge
-
Romexis Software Bridge
-
Shadewave Software Bridge (browser-based, color-matching software)
-
Sidexis Software Bridge
-
File Import (.bmp, .png, .jpg, .tif)
Note: Because many older intraoral video cameras are not supported in Dentrix Ascend Imaging in the Chrome browser, a video capture helper app launches when you attempt to acquire images using legacy capture devices with external analog video to USB adapters or internal capture devices that include an analog/digital converter.
Supported CAD/CAM Scan Devices
-
DTX Studio Clinic Software Bridge
Note: The purchase and installation of the DTX Studio Clinic imaging program is required.
-
Romexis Software Bridge
-
File Import (.stl, .ply)
Supported 3D Volume Devices (CBCT)
-
Gendex GXDP-700 S and SC (supported via the VixWin software bridge)
-
J. Morita Veraviewepocs 3D Series (supported via the i-Dixel software bridge)
-
J. Morita Veraview X800 (supported via the i-Dixel software bridge)
-
J. Morita 3D Accuitomo Series (supported via the i-Dixel software bridge)
-
KaVo ProXam 3D and 3DQ
-
Owandy I-Max 3D, 3D Pro, Ceph 3D, and 3D Ceph Pro
-
Acteon AIS Software Bridge
-
Carestream Imaging Software Bridge
-
DEXIS Software Bridge
-
DTX Studio Clinic Software Bridge (see note # 4 below)
-
ImageWorks Software Bridge
-
J. Morita i-Dixel Software Bridge
-
Romexis Software Bridge
-
Sidexis Software Bridge
-
Vatech EzDent-i Software Bridge
-
File Import (.dcm)
Important: If you want to use a device other than a DEXIS device, additional costs may be required, such as the purchase of drivers, to integrate that device with Dentrix Ascend Imaging. Before you purchase the Dentrix Ascend Imaging add-on or a particular device that you want to use with Dentrix Ascend Imaging, consult the manufacturer of that device to verify if there will be costs to get that device working with Dentrix Ascend Imaging.
Notes:
-
Some, but not all, devices have been tested using a TWAIN driver. Using a TWAIN driver with certain devices might have unexpected results.
-
Depending on the availability of drivers from the manufacturer, this device may have compatibility issues with computers running MacOS 10.15 (Catalina) and 11 (Big Sur) and computers that have an M1 chip.
-
This device is supported on computers running MacOS 10.15 (Catalina) if SoPro Imaging 1.13 is installed. When you start the acquisition, the MAV2M program (which replaces SoPro Capture) opens automatically.
-
Dentrix Ascend Imaging displays and saves only a 2D snapshot of a 3D volume that is acquired using this software bridge. However, the full 3D volume may still be viewable in the corresponding third-party software.