Dentrix Imaging supports acquiring intraoral images from Carestream RVG sensors.
· You must install the drivers for the Carestream RVG sensor on each Windows client workstation that the sensor will be connected to.
· Calibration/correction files are stored in the sensor and installed automatically on first use.
Notes:
· Before installing any imaging device, you must configure the acquisition agent application on each Windows client workstation that you will use to acquire images.
· The Carestream RVG direct integration receives images that are already filtered using a Kodak/Carestream X-ray filter. For best results, set the image filters to "Not Enhanced" for each type of procedure before you acquire images using the RVG sensor.
· This guide was last updated: 6/12/2025
For more information, click the following links:
· Installing the Carestream RVG device drivers
· Testing the Carestream RVG sensor
· Troubleshooting the Carestream RVG sensor