Vital Signs tab

You can add vital signs data in three ways:

·        By connecting a vital signs monitor that imports data directly into EndoVision. To use this method, you will need to install and use the Vital Signs Monitor Client.

·        Through manual data entry.

·        By import vital signs data into the Electronic Health Records (EHR) of EndoVision, which will save you from having to transcribe data. You can transfer your patients' vital signs electronically from approved monitors and store them securely.

The following is a list of approved devices you can use to import data:

·        Mortara Surveyor S12 or S19

·        Criticare:

·        ComfortCuff

·        Poet line

·        Scholar line

·        nGenuity*

·        Welch Allyn:

·        Spot LXi

·        Spot Vital Signs

·        VSM 5200

·        VSM 300

·        Datascope: Any monitor that supports DIAP

·        Phillips VS Series:

·        Network

·        Serial

·        GE: Dash 2000

·        Edan:

·        iM50*

·        iM80*

Note: The devices listed above have been certified to work with EndoVision. If you have devices other than those listed, they may work with EndoVision but have not been tested.

To manually add vital signs

1.   With a case selected (in the Cases Section), in the Objective - History section of EHR, on the Vital Signs tab, click Add.

2.   Enter the following details:

·        Time - The time the patient's vital signs were taken.

·        Stage - The stage the patient is in.

·        BP Sys/Dias. - The patient's systolic and diastolic blood pressure readings.

·        Pulse - The patient's heart rate.

·        Resp. - The patient's respiratory rate.

·        Ox. - The patient's oxygen level.

·        Ht. - The patient's height in inches.

·        Wt. - The patient's weight in pounds.

·        BMI - The patient's body mass index, which is calculated automatically using the height and weight you enter.

·        Temp. - The patient's temperature.

·        EKG - The EKG results.

·        Comments - Comments regarding the vital signs entry.

To delete vital signs

1.   Select the entry that you want to delete.

2.   Click Delete.

A confirmation message appears.

3.   Click Yes.

To refresh vital signs data

Click Refresh.

To attach an artifact flag

1.   Select an entry.

2.   Click the Artifact Flag(Click to toggle) link to assign or remove the artifact flag for the entry.

An artifact flag is a red flag to the left of an entry.

 

Need more help?

You can visit our website, contact EndoVision Customer Support, or suggest a new feature or improvement on User Voice.