Once you have installed the DEXIS Platinum or Titanium sensor, the Configuration Wizard opens.
To configure the DTX Studio bridge
1. Install the DEXIS Platinum or Titanium sensor.
The DTX Studio Bridge Configuration Wizard dialog box appears.
2. Select I accept the terms in the license agreement, and then click Next.
The Installation Key screen appears.
3. Type the installation key, and then click Next.
The Working Folder screen appears.
4. To accept the default working folder location, click Next.
Note: To create an alternate working folder, click Browse.
The Installation Successful screen appears.
5. Click Finish.
6. To connect your sensor complete the following:
· DEXIS Platinum – If the sensor is offline when you connect the Platinum sensor, click the Notifications tab, and then browse to the calibration files.
The sensor connects and is ready to use.
Note: The calibration/correction files are provided with the sensor on a CD labeled "DEXIS Platinum Sensor File." If you cannot locate the CD and/or the calibration files are not already copied to the computer, DEXIS can usually supply the calibration/correction files using the sensor's serial number.
· DEXIS Titanium – Connect the sensor. The calibration files download automatically. To confirm that the sensor is connected and that the calibration files downloaded, in the System Tray, click the DTX Studio Bridge icon. The DTX Studio Bridge dialog box appears. The green dot indicates that the Titanium sensor is ready to use.
